MR. STICKY'S STATIC MIXER 3-PAK

Use these additional mixers to dispense glue from a 57-Gram Auto-Mix cartridge that was partially used with a prior mixer. If the glue is not dispensed during the cure time of the glue, the glue will cure in the mixer and it must be replaced. This system is a very easy way to dispense mixed glue to a precise location with little cleanup required.

Use Mr. Sticky's Static Mixers with the Auto-Mix Cartridges and Mr. Sticky's Auto-Mix Dispensing Gun.

Note:

1. Always follow Manufacturer's instructions for proper use.

2. Mixing tips are tested for use with specific adhesives. Never substitute another mixing tip as the adhesive may not mix properly.

3. Always dispense and discard the first three inches from a new mixing tube. (The first three inches may not be fully mixed due to lack of back-pressure.)

4. Never put a used mixing tip on a new syringe.

5. If the glue cures in the mixing tip, replace the tip with a new one. Tip life can be extended by periodically dispensing glue through it.